Service 10

Trench and surface restoration in Arizona

The job is not finished when the conduit is in. Sidewalks, curbs and asphalt have to go back to original condition. We coordinate each task for you, as part of the same package as the trench.

Backhoe digging a narrow utility trench along a saw-cut road edge beside curb and gutter, with traffic delineators in place
A trench along a saw-cut road edge. Once the conduit is in and the trench is backfilled, this strip is what gets patched back.

In short

Trench and surface restoration is the work of putting a site back after underground utilities go in: asphalt patched, sidewalks and curbs replaced, all returned to original condition. Premier Underground coordinates and manages each restoration task as one package with the trench, so you are not chasing separate trades to finish the job.

01 — What it is

What is trench restoration, and when do you need it?

You need restoration whenever a utility route crosses a finished surface. A trench through a parking lot leaves a strip of missing asphalt. A crossing at the street edge can take out curb and sidewalk. Until those are replaced, the lot cannot be striped, the walk cannot open and the project cannot close out.

From spoils haul-off to asphalt patch-back, these are the requirements that complete a construction project. They are small next to the underground scope, and they are often what holds up the finish. Putting them in the same package as the trenching keeps them on the same schedule.

02 — Scope

What restoration covers

Three surfaces come up on most underground jobs. We coordinate all three, which gives you the collective services in one.

01

Asphalt patch-back

The strip that was saw-cut and removed for the trench is paved back between the cut lines, in streets, drives and parking areas.

02

Sidewalk replacement

Sidewalk that was broken out to let the trench through is replaced, so the walk is whole and open again.

03

Curb replacement

Curb removed at a crossing is put back to line up with the curb on either side.

What you get by packaging it with the trench

One contract and one schedule cover the route from the first cut to the finished surface.

  • Restoration priced with the underground work
  • Each restoration task coordinated for you
  • Surplus spoils and debris hauled off before the patch
  • Quality control involved before close-out

03 — Method

How we manage restoration on an underground job

Restoration goes well when it is planned before the surface is opened, not after the trench is closed.

  1. Preconstruction

    Include it in the estimate

    Our estimators read the route for the surfaces it crosses and include restoration in the number. Send any restoration details with the plans.

  2. Hand-off

    Carry it into the contract

    At hand-off, your requests, schedule and needs go from preconstruction to the project manager, restoration included.

  3. Field

    Open the surface cleanly

    Straight saw-cuts leave a sound edge for the patch to meet. The trench is dug, the utilities are installed and the trench is backfilled.

  4. Operations

    Coordinate each task

    The project manager schedules the sidewalk, curb and asphalt work behind the backfill. Daily operations meetings keep the plan current.

  5. Quality

    Walk it and close out

    Close-out includes a final walkthrough by operations and quality control, to confirm the finished work meets your expectations and ours.

The surface is the part everyone sees

Nobody sees a duct bank after it is buried. They see the patch. That is why restoration falls under the same Golden Triangle as the rest of our work: Safety, Quality, Productivity. Quality control site visits are there to catch a problem while it can still be adjusted, not redone.

How we run a job   Our safety program

04 — Questions

Restoration questions

What is trench restoration?

Trench restoration is putting the surface back after underground utilities are installed and the trench is backfilled. On a paved route that means patching the asphalt and replacing any sidewalk or curb that was removed, so the surface is returned to its original condition.

Does Premier Underground do the restoration work itself?

We coordinate and manage it. When sidewalks, curbs or asphalt have to go back to original condition, we coordinate each task for you and package it with the underground work, so you deal with one team for the cut, the trench and the patch.

What is asphalt patch-back?

Asphalt patch-back is repaving the strip that was saw-cut and removed to dig a trench. The new asphalt is placed between the saw-cut edges, so the patch meets the existing pavement on a straight, clean line.

Who decides what standard the restoration has to meet?

It is usually set by the plans, the property owner or the agency that owns the street or sidewalk. Send us the restoration details and any permit conditions with the plans, and we will price and coordinate the work to that standard.

Your job. Your way.

Need the surface put back when the trench is done?

Send us the plans and any restoration details for the sidewalk, curb or asphalt on the route. We coordinate the patch-back with the underground work, so you manage one team from the first cut to the finished surface.

Premier Underground Construction, LLC
575 N Eliseo Felix Jr Way, Avondale, AZ 85323
623-748-9650 · estimating@premierunderground.com
Serving all of Arizona since 2004