Questions and answers

Dry utility and underground construction FAQ

The questions estimators, project managers, superintendents and job seekers ask us most, answered in plain English. Each answer starts with the short version.

01 — About Premier

Who is Premier Underground?

What does Premier Underground do?

Premier Underground is a turnkey dry utility contractor. We build the underground infrastructure for power and communications: trenching, excavation, conduit and duct bank, horizontal directional drilling, vacuum excavation, hard dig, saw-cutting, demolition, spoils haul-off, surface restoration and augering for site lighting. Customers hand us the underground scope so one team carries it from the first saw-cut to the finished surface. See all services.

Where is Premier Underground located, and where do you work?

Our corporate office is at 575 N Eliseo Felix Jr Way, Avondale, AZ 85323, in the Phoenix metro area. We take on dry utility projects across the state of Arizona. Past work runs from basements in downtown Phoenix to Luke Air Force Base and Phoenix Sky Harbor. See the service area page, or contact us to ask about a specific location.

How long has Premier Underground been in business?

Since 2004. Premier Underground has provided underground utility work to Arizona contractors, developers and builders for two decades, and founder Newman Wong is still our president. Across the company we carry 100 years of combined experience, and our estimators bring more than 30 years of combined industry knowledge. Read more about Premier or meet the team.

Who hires Premier Underground?

Electrical contractors, general contractors, plumbing and mechanical contractors, residential developers and home builders, and renewable energy contractors. Most often we are the underground subcontractor on the project team. Past teams have included Delta Diversified Enterprises, Sturgeon Electric, DP Electric and Wilson Electric, working under general contractors such as Whiting-Turner, Holder Construction, McCarthy and Hensel Phelps.

What kinds of projects has Premier Underground built?

Data centers, airport work, healthcare campuses, a military base, solar and downtown sites. Examples include forty 5-inch conduits run 18 feet deep between two basements at Block 23 in downtown Phoenix, concrete-encased raceways and more than 16 manholes for the PHX Sky Train, hard dig at the Iron Mountain data center, and more than 10,000 linear feet of trench at Mohave Solar. See project experience and the markets we serve.

02 — Services and methods

Dry utility terms and methods, explained.

What is dry utility construction?

Dry utility construction is the underground work for the utilities that are not water pipes: electric power, natural gas and communications such as telephone, cable and fiber. Water, sewer and storm drain are the wet utilities. A dry utility contractor opens the trench, places conduit, duct banks, vaults and pull boxes, then backfills and restores the surface so the utility or electrical contractor can pull cable. More on dry utility construction.

What is a joint trench?

A joint trench is one shared excavation that carries several dry utilities, typically electric, gas, telephone and cable, each at its own level and at a set separation from the others. Sharing a trench means one excavation instead of several. Each utility provider publishes its own rules for depth, separation and what may share the trench, so the approved plans and the provider's specification govern the layout.

What is a duct bank?

A duct bank is a group of conduits installed together in one trench at fixed spacing, either encased in concrete or buried directly in select backfill. Duct banks carry medium-voltage, low-voltage and communications feeders. Encasement protects the conduits under heavy loads, and the spacing and backfill affect how well power cables shed heat, so both are built to the engineer's design. See duct bank and conduit installation.

What is horizontal directional drilling, and when is it better than an open trench?

Horizontal directional drilling, or boring, installs conduit or pipe without opening a trench. A steerable drill head bores a pilot hole along a planned path, a reamer enlarges the hole, and the conduit is pulled back through it. It suits crossings under roads, driveways and other surfaces that cannot be cut or closed. Open trenching is usually the better fit for multi-conduit duct banks and joint trench.

What is potholing, and what is vacuum excavation?

Potholing means exposing an existing buried utility at a specific point to confirm exactly where it is and how deep, before a trench or bore goes near it. It is usually done by vacuum excavation, also called soft dig, which loosens soil with pressurized water or air and removes it by suction instead of a bucket. We use vacuum excavation in congested and unknown ground to lower the risk of a strike.

What is caliche, and can you dig through it?

Caliche is soil cemented by calcium carbonate into a hard layer, and it is a well-known excavation problem in southern Arizona. Yes, we dig through it. We run backhoe hammers, excavator hammers and rock trenchers for hard dig and rock trenching, so hard ground changes the method, not the contractor. Share any soils report when you request a quote so the estimate reflects the real ground.

Do you handle saw-cutting, haul-off and restoration, or only the trench?

We handle all of it. Laying underground utilities starts with saw-cutting and removal and ends with the surface put back. We saw-cut indoors and outdoors, break out sidewalks, footers and pole bases, haul spoils in dump trucks from 5 to 35 tons, and coordinate sidewalk, curb and asphalt restoration back to original condition. One contractor carries the sequence, so there are fewer hand-offs to manage.

03 — Bidding and working with us

How do you get a quote, and what happens next?

How do I request a quote from Premier Underground?

Send your plans and scope through the request-a-quote form, email estimating@premierunderground.com, or call 623-748-9650. Our preconstruction team prepares the estimate. If you award us the work, the same department completes a project hand-off to operations, so what was discussed during the bid is what the field team is given to build.

What should I send to get an accurate estimate?

Send the drawings and specifications for the underground scope, the utility provider's requirements if you have them, your schedule, and any soils or geotechnical information. Tell us which pieces you want us to carry, such as saw-cutting, conduit installation, haul-off or restoration. The more we know about the ground and the surface above it, the closer the estimate will be to what the crew finds in the field.

What happens after we award the job to Premier?

Preconstruction hands the job to operations in a project hand-off. Your requests, schedule and needs are written into the contract and passed to the project manager who will run the work. From there we procure material, schedule equipment and crews, hold daily operations meetings, and finish with a close-out walk alongside our quality control team. See how we work for the full process.

How does Premier keep an underground job on schedule?

By lining up the resources before the crew arrives. Material is procured ahead of need to avoid shortages. Project managers schedule heavy equipment, small tools and materials with resource management software. In-house mechanics keep equipment and vehicles working, and our own logistics team, with more than eight experienced CDL drivers, moves the equipment. Daily operations meetings adjust the plan day by day.

04 — Safety and quality

How does Premier manage safety and quality?

What are Premier's 3-4-5-6 rules?

They are our four core rules around an excavation, named for the distance or depth in feet where each one applies. Spoil stays 3 feet back from the edge. A safe way in and out at 4 feet. Trench protection at 5 feet. Fall protection at 6 feet. They apply on every job, every day, whether it is a one-day service call or a multi-million dollar data center. Read about our safety program.

How is safety managed on a Premier jobsite day to day?

Field leadership completes a job safety analysis and a daily trench inspection, and records bore logs, all through our digital system. Monthly safety meetings and a dedicated Risk Management Department support the crews, and company leaders are scheduled for jobsite visits. Safety is one corner of our Golden Triangle with quality and productivity. Our method is four steps on repeat: train, equip, monitor, train again.

How does Premier check the quality of its work?

Our quality control team visits projects while the work is under way, so direction can be adjusted before a task has to be redone. Each visit is documented in a report that covers any deficiency found and how it is corrected. Those findings feed further training under our 20-60-20 rule. At the end of the job, quality control and operations walk the finished work together before close-out.

Do directional boring and augering count as excavation under Arizona's 811 law?

Yes. Arizona's underground facilities law, A.R.S. 40-360.21, defines excavation to include drilling, augering and boring as well as trenching. Excavation waits until the lines are marked after a locate request. Check the current statute and Arizona 811 for the details that apply to your work.

What do the utility locate paint colors on the ground mean?

They follow the APWA Uniform Color Code. White marks the proposed excavation. Pink is temporary survey marking. Red is electric power and lighting. Yellow is gas, oil, steam or petroleum. Orange is communications, alarm or signal lines. Blue is potable water. Purple is reclaimed water, irrigation and slurry lines. Green is sewers and drains. The dry utilities are the red, orange and yellow marks.

05 — Careers

What is it like to work at Premier?

Is Premier Underground hiring, and how do I apply?

Yes. We are always hiring. Apply through our online application system. Premier Underground Construction, LLC provides equal employment opportunities to all qualified candidates and employees, and decisions about hiring, compensation, training and performance evaluation are made fairly. We are committed to a workplace free from discrimination or harassment. Read more on the careers page.

What does Premier look for when hiring?

A culture fit. Our human resources team recruits skilled workers, and cultural fit plays a key role in the process. That means a person's beliefs and behavior line up with our six values: family, integrity, dependability, humbleness, respect and teamwork. In plain terms, we look for people who treat others like family, do the right thing, keep their commitments and keep learning.

Does Premier offer training and benefits?

Yes. We exist to train and develop our people. Employees receive performance evaluations that recognize work done well and point out areas for professional growth, and cross-training is provided whenever the opportunity comes up. Premier offers a benefits package meant to support an employee's family, health and financial future. Ask about the details for a specific role when you apply.

Your job. Your way.

Did we miss your question?

Send the drawings or just ask. Our preconstruction team will tell you how we would build it and what we need to price it.

Premier Underground Construction, LLC
575 N Eliseo Felix Jr Way, Avondale, AZ 85323
623-748-9650 · estimating@premierunderground.com
Serving all of Arizona since 2004